Cuptor tubular cu compartimentare orizontală - HST / HZS



The split tube furnace range HST (single zone) and HZS (three zone) uses free radiating wire elements embedded within the insulation of the furnace body. The benefit of this design is its flexibility; with the use of tube adapters the same furnace can be used with a variety of tube diameters.

These furnaces comprise a furnace body which is hinged and split into two halves along its length. This makes exchange of work tubes easier and also enables the tube furnace to be used with reactors or work tubes where end flanges would make insertion into a non-split furnace difficult.

This range of tube furnaces does not include an integral work tube and one must be selected as an additional item. The work tube length is dependent on the application, for example, for use with modified atmosphere or vacuum. The use of a separate work tube has the advantage of protecting the heating elements from damage or contamination.

The HZS three zone tube furnaces offer excellent uniformity which results from division of the heated length into three zones, each with its own controller and thermocouple.

Caracteristici standard

  • 1200°c temperatură maximă de operare
  • Carbolite Gero 301 controller, with single ramp to set-point & process timer
  • acceptă tuburi de lucru cu diametrul exterior de până la 110mm
  • Heated lengths, single zone 200, 300, 400, 450, 600 or 900 mm (HST)
  • Heated lengths, 3-zone 600 or 900 mm (HZS)
  • furnal orizontal cu modul de control separat pe o conductă de 2 metri
  • furnalul se împarte în două jumătăți pentru a acomoda vasele reactorului, piesele de lucru mari sau mostrele fixate într-o instalație de testare
  • Wire elements in high quality vacuum formed insulation ensure fast heat up, excellent temperature uniformity and short cool down times
  • HZS: End zone control is via back to back thermocouples
  • HZS: End zones of 150 mm each end

Opțiuni (specificați opțiunile în momentul efectuării comenzii)

  • A range of sophisticated digital controllers, multi-segment programmers and data loggers is available. These can be fitted with RS232, RS485 or Ethernet communications
  • protecție la supra-temperatură (recomandată pentru protejarea conținutului de valoare și pentru funcționarea nesupravegheată)
  • A range of additional work tubes, end seals and work tube packages is available for use with modified atmosphere and/or vacuum
  • Vacuum packages with a choice of rotary vane pump or turbomolecular pump are available for furnaces with tube inner diameters of 60 mm and above
  • Insulation plugs, gas tight end seals and vacuum connections available
  • Wide choice of tube diameters and materials is available: eg quartz, ceramic, metal
  • disponibil cu kit cu stand ”I” pentru utilizare verticală sau orizontală
  • modul de control pe conducte mai lungi de 6 metri
  • HZS: Three equal length zones
  • HZS: If programmed cooling is required, programmable controllers capable of retransmission of setpoint can be supplied

Conținutul poate fi supus modificărilor sau corectărilor